What would be the best amp for 2 12 inch Kicker cvx subwoofers?

Im going to buy 2 12 inch kicker cvx subs and i was wondering what to buy 2 or 4 ohm? And what amp would be the best? They are rated at 750rms each.

Related posts

Tags: , , , , ,

Wednesday, April 6th, 2011 Kicker Subwoofers

3 Comments to What would be the best amp for 2 12 inch Kicker cvx subwoofers?

  1. I got 2 kicker comps rated at about 1000 each, And I’m running a 2400watt alpine amp. It knocks hard! Whatever you got get a little over, that way you wont have over-heating problems, will get full sound quality out of them, etc! Therefore with 750 each, I’d got with anywhere from a 1400-2000 watt amp pref (kicker, alpine, etc)

    2. ASK A LOT OF QUESTiONS! on April 6th, 2011

  2. if you can afford it and you want a matching system i suggest buying 2 dual 2ohm cvx’s and a zx1500.1.
    if you buy dual 2ohm subs you can wire them in series which will make a 2ohm load which is perfect for the zx1500.1. or if you want to go a little cheaper you can even use the zx1000.1.they usually put out about 1200 watts rms.
    i myself had this setup with the zx1000.1 and it pounded
    you can get a new zx1500.1 on ebay for less than $400
    you can also get a pair of 12″ cvx’s for about $360

    3. anzures87 on April 6th, 2011

  3. that will depend on what you want your final impedance to be
    the lower the final impedance at the amp the lower the sound quality but the easier/cheaper it is to power

    this will show you what your final impedance’s will be depending on your wiring http://www.the12volt.com/caraudio/woofer_configurations.asp

    personally i would go with the 2ohm versions wired with the voice coils wired in series, speakers wired in parallel http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=22 for a 2ohm load at the amp

    4. inktownlegend on April 6th, 2011