How do i blow my kicker subwoofers?

I HAVE 2 KICKER 12 CVR’S HOOKED UP TO 1 SONY AMP (900 WATT) AND I WANT TO BLOW THEM!!! (SO I CAN GET SOME NEW ONES) !!! THEY ARE UNDER WARRANTY BUT THEY HAVE COSMETIC DAMMAGE THOUGH. SO WHAT DO I DO? HOW DO I DO IT?

Related posts

Tags: , , ,

Wednesday, March 30th, 2011 Kicker Subwoofers

10 Comments to How do i blow my kicker subwoofers?

  1. PUT your foot through it :)

  2. edselmanll on March 30th, 2011
  3. Play your music at a nice low volume, then quickly turn it up full blast!
    Include lots of treble and bass.

  4. MucusMembrane on March 30th, 2011
  5. turn your amp as high as it can go then your stereo, with something with a lot of bass.

  6. Joe B on March 30th, 2011
  7. turn up the boost on the amp turn up the bass and volume

  8. Tampa Jo on March 30th, 2011
  9. just crank the volume to full blast, just dont be in the car at the same time.

  10. LIMD on March 30th, 2011
  11. no company will replace something that was intentionally destroyed. they will figure out what you did and say your shit out of luck.

  12. mustang656 on March 30th, 2011
  13. They clearly do not cover damage through negligence, misuse, accident, or abuse.
    They cover defects in material or workmanship.

    How unethical you are and your husbands in the Navy.
    Nice.

  14. timc_fla on March 30th, 2011
  15. You realize, of course, your asking how to commit fraud.
    On the other hand, if you can get the speakers out of the speaker box (I don’t know how mechanical you are) put them in the oven at 400* for 30 minutes and then (after they cool) put them back in the speaker box. then crank it up. You might go a little hotter or longer but watch them close because you don’t want to melt the outside. Now I’ve just heard that I do not have proof

  16. quitbeing on March 30th, 2011
  17. Take an extention cord and cut the female end off put the white wire in either one of the + or – and the black wire in the other now plug the cord into the 120 v ac outlet , you should immediatly fry the vioce
    coil in the speaker unplug the cord and repeat for the other speaker.
    You’re going to have a tough time blowing them with that 900w amp.
    Speakers run on dc volts, and not very much, so 120v AC sould quickly do the job.

  18. mn99222 on March 31st, 2011
  19. turn the bass up all the way as well as the volume. if that doesnt work then you need a bigger amp to do it.

  20. jag34 on March 31st, 2011